|
|
 |
350-401 Practical Information - Cisco Reliable Implementing Cisco Enterprise Network Core Technologies 350-401 Encor Test Notes - Royalholidayclubbed
|
|
RHC Destination Reviews
Who Is Harpy?
Need More Information?
It is universally accepted that in this competitive society in order to get a good job we have no choice but to improve our own capacity and explore our potential constantly, and try our best to get the related 350-401 Practical Information certification is the best way to show our professional ability, however, the 350-401 Practical Information exam is hard nut to crack but our 350-401 Practical Information preparation questions are closely related to the exam, it is designed for you to systematize all of the key points needed for the 350-401 Practical Information exam. Now, let’s start your preparation with 350-401 Practical Information training material. The 350-401 Practical Information practice pdf offered by Royalholidayclubbed latest pdf is the latest and valid study material which suitable for all of you. One more to mention, with our 350-401 Practical Information test guide, there is no doubt that you can cut down your preparing time in 20-30 hours of practice before you take the exam.
350-401 Practical Information actual test guide is your best choice.
CCNP Enterprise 350-401 Practical Information - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) That is because our company beholds customer-oriented tenets that guide our everyday work. 350-401 Valid Exam Camp Sheet training materials will definitely live up to your expectations. Not only our 350-401 Valid Exam Camp Sheet study materials contain the latest exam questions and answers, but also the pass rate is high as 98% to 100%.
Because all of them have realized that it is indispensable to our daily life and work. With the high employment pressure, more and more people want to ease the employment tension and get a better job. The best way for them to solve the problem is to get the 350-401 Practical Information certification.
Cisco 350-401 Practical Information - More useful certifications mean more ways out.
We attract customers by our fabulous 350-401 Practical Information certification material and high pass rate, which are the most powerful evidence to show our strength. We are so proud to tell you that according to the statistics from our customers’ feedback, the pass rate among our customers who prepared for the exam with our 350-401 Practical Information test guide have reached as high as 99%, which definitely ranks the top among our peers. Hence one can see that the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) learn tool compiled by our company are definitely the best choice for you.
Imagine, if you're using a 350-401 Practical Information practice materials, always appear this or that grammar, spelling errors, such as this will not only greatly affect your mood, but also restricted your learning efficiency. Therefore, good typesetting is essential for a product, especially education products, and the 350-401 Practical Information test material can avoid these risks very well.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
All in all, high efficiency of HP HPE2-N71 exam material is the reason for your selection. Microsoft AZ-204-KR - They provide comprehensive explanation and integral details of the answers and questions. ATLASSIAN ACP-100 - And on your way to success, they can offer titanic help to make your review more relaxing and effective. Fortinet FCSS_SOC_AN-7.4 - You will find that learning is becoming interesting and easy. The successful outcomes are appreciable after you getting our Microsoft AZ-120 exam prep.
Updated: May 28, 2022
|
Copyright © 2006-2007 by RHC.
All rights
reserved. |
---------------
If you don't find what you are looking for here
to help you resolve your timeshare scam or Royal Holiday problem
please write to us at:
harpy @ royalholidayclubbed.com
www . Royal Holiday Clubbed . com
|
|